Dishwasher Installation Cost by City and State (2026)
Dishwasher installation labor costs 20-35% more in high cost-of-living metros than the national average. Here is what to expect in 20 major markets.
Installation Cost by City (20 US Markets)
| City | Replacement Labor | New Install Labor | vs. National Avg |
|---|---|---|---|
| New York City, NY | $200-390 | $390-910 | +30% |
| San Francisco, CA | $195-390 | $390-910 | +30% |
| Boston, MA | $200-390 | $390-910 | +30% |
| Los Angeles, CA | $190-370 | $370-870 | +25% |
| Seattle, WA | $185-360 | $360-840 | +20% |
| Chicago, IL | $180-360 | $360-840 | +20% |
| Washington DC | $180-360 | $360-840 | +20% |
| Denver, CO | $160-320 | $320-740 | +7% |
| Austin, TX | $155-310 | $310-720 | +3% |
| Dallas, TX | $150-300 | $300-700 | Avg |
| Houston, TX | $150-300 | $300-700 | Avg |
| Phoenix, AZ | $150-300 | $300-700 | Avg |
| San Diego, CA | $165-330 | $330-770 | +10% |
| Charlotte, NC | $145-290 | $290-680 | -3% |
| Columbus, OH | $145-285 | $285-665 | -5% |
| Indianapolis, IN | $140-280 | $280-650 | -7% |
| Jacksonville, FL | $138-275 | $275-640 | -8% |
| San Antonio, TX | $135-270 | $270-630 | -10% |
| Fort Worth, TX | $135-270 | $270-630 | -10% |
| Rural South / Midwest | $128-255 | $255-595 | -15% |
Why Prices Vary by Region
Local wage rates
Plumber and appliance technician hourly rates track local median wages. NYC plumbers average $100-150/hr vs $65-90/hr in rural Texas.
Permit costs
NYC requires permits for nearly all plumbing work and charges $150-300 per permit. Many smaller cities charge $25-75 for the same permit.
Contractor supply vs demand
Dense metros with high renovation activity have fewer available contractors. When demand exceeds supply, rates increase. January bookings in any market are cheaper.
Materials and travel
Rural areas sometimes pay slightly more for parts due to shipping costs and contractor travel time from the nearest metro.
Highest and Lowest Cost States (Labor Only, Replacement)
5 Highest Cost States
| State | Avg Replacement Labor |
|---|---|
| New York | $195-390 |
| California | $185-370 |
| Massachusetts | $190-380 |
| Washington | $180-360 |
| Illinois | $175-350 |
5 Lowest Cost States
| State | Avg Replacement Labor |
|---|---|
| Mississippi | $120-240 |
| Arkansas | $125-250 |
| Kentucky | $128-255 |
| Alabama | $128-255 |
| West Virginia | $130-260 |
Local Research Tips
- +Check your state contractor licensing board website to verify plumber or electrician license before hiring
- +Get quotes via Angi, Thumbtack, and one local appliance store for comparison
- +Book in January or February for the lowest contractor rates (national pattern)
- +In NYC: assume permits will be required for any work beyond a simple swap and budget $150-300 extra
Related Guides
FAQ
How much does dishwasher installation cost near me?
Costs vary by location. In high cost-of-living metros (NYC, SF, Boston), expect 25-35% above national averages. In lower-cost markets (rural South, Midwest), expect 10-15% below average. The national average for replacement labor is $150-300. In NYC that becomes $200-390. Use the table above to find your city. For an accurate local number, get 3 quotes from local contractors via Angi or Thumbtack.
Why does dishwasher installation cost more in some cities?
Three main factors drive regional variation: local contractor hourly rates (tied to local wages), local permit costs (NYC and SF charge more per permit than smaller cities), and contractor demand versus supply (busy renovation markets push rates higher). Materials costs also vary slightly due to shipping costs in rural areas. January and February are typically the lowest-rate months nationwide as contractor demand drops after the holidays.
Get 3 Local Quotes for Your City
The table above shows typical ranges. Your actual quote depends on your specific hookup condition, contractor availability, and the appliance brand.
Get Free Local Quotes